Kverneland Exacta CL W PRO
Un épandage précis dans des conditions vallonnées
Le distributeur d'engrais Kverneland CL W PRO est le partenaire idéal pour un épandage précis pour les exploitations de polycultures - élevage, même en conditions vallonnées
Points forts
CentreFlow system – smooth acceleration of the fertiliser Highly accurate weighing system including 4 load cells and a reference sensor ISOBUS compatible and AEF certified Sections of 4 metres with Basic Section Control EasySet for quick and easy adjustment ExactLine - border spreading deviceDescription
Le distributeur d'engrais Kverneland Exacta CL W PRO bénéficie d'une conception compacte et d'une capacité élevée avec un volume maximum de 2800 litres. C'est l'épandeur à pesée 100% ISOBUS idéal pour un épandage précis en conditions vallonnées, en particulier dans les exploitations de polycultures. Le châssis robuste avec 4 pesons et un capteur de référence est conçu pour une utilisation intensive de l'épandeur. Des accessoires comme les bavettes, l'échelle repliable intégrée ou le châssis de manutention sont disponibles en option pour améliorer le confort de l'utilisateur. Le logiciel Basic Section Control ajuste la dose en bord de champ en continue à l'aide d'un système de positionnement GPS afin d'optimiser le recouvrement et la couverture avec un minimum de surdosage et de sous-dosage. Il en résulte une réduction de la quantité d'engrais et une augmentation du rendement. Il s'agit d'un moyen simple de réduire le surdosage en bord de champs en augmentant le nombre de sections.
Points forts
- Système d'épandage CentreFlow
- Système de pesée avec quatre cellules de pesée et un capteur de référence unique
- EasySet pour un réglage rapide et facile
- L'épandage en bordure est facile !
- Compatible avec l'ISOBUS 11783 pour un branchement facile
- Possible en combinaison avec IsoMatch GEOCONTROL
- Maximisez votre rendement avec le contrôle de section de base
Caractéristiques
- No impact, no fragmentation, no dust: Central release point, smooth acceleration and centrifugal force accelerates fertiliser up to disc speed before it reaches the vane.
- Accurate spreading pattern: A double overlap spreading pattern gives unrivalled accuracy. The 8 vanes per discs are ensuring a continous flow of fertiliser to the field. This is important for high capacity spreading and forward speed.
- Minimal wind influence, maximum tolerance: Flat discs and a horizontal flow of fertiliser give a symmetrical spreading pattern.
- Consistent spreading pattern: Eight vanes per disc, eight sectors per revolution give an equal distribution. Double overlap spreading pattern.
- Guaranteed accuracy on slopes: guaranteed accuracy on slopes. The fertiliser always contacts the vanes at the same point, also on slopes and travels the complete length of the vane.
- Continuous dynamic "online - calibration" with high frequency communication signal.
- Kvernelands unique reference sensor technology: all negative influences are automatically corrected and eliminated, ensuring utmost spreading accuracy even on hill sides. The Kverneland reference sensor gives you absolute accuracy, because every kilo counts!
- Load cells in combination with the unique reference sensor:
- Auto calibrating and continuous weighing system
- Automatic correction on slopes
- Automatic correction of shocks, even on rough terrain
- Automatic speed related dosing system
- No calibration test needed
- Highest accuracy in all conditions: even spreading quality guaranteed! Save costs and increase quality!
- The compact EasySet 'dashboard' gives you considerably simplified accurate setting and adjustment of application rates. Two hydraulically operated metering plates, each with three discharge openings ensure an equal fertiliser flow from the hopper to the spreading discs.
- The development department of Kvernelands spreader R&D team has its own spreader competence centre in order to allow continuous testing throughout the year. All test are carried out according to the strictest international standards and quality requirements.
- The key to accurate spreading is matching fertiliser quality and litre weight with the spreading charts as close as possible. The Kverneland Exacta checklist helps you to ensure consistent accuracy in all field conditions
1. Select fertiliser type
2. Determine granule size and distribution
3. Determine litre weight
- Direct access to the most recent test results at: www.kvernelandspreadingcharts.com or download the spreading charts Application via the App Store or get it on Google Play
- Kverneland offers the ExactLine system or manual/hydraulic border spreading plate for border spreading. The ExactLine can be accurately set for all types of fertiliser and for all working widths. Operation is easy, no need to leave the tractor seat. For the CL GEOSPREAD, HL, TL TLX GEOSPREAD (iDC) models the ExactLine can even be fitted on the left- and right-hand side of the spreader.
- With one-side boundary spreading the tractor is driven approximately 2 metres from the field border.
- With boundary track spreading the tractor is driving in the first tramline and is spreading to the border. The distance to the border is the half of the working width.
- The Border Spreading Indicator (BSI) on the standard weighing spreaders (Exacta CL EW, Exacta CL W PRO, Exacta TL) indicates which border spreading device is active. For the GEOSPREAD machines this is integrated in the electronics and the active device will be displayed on the control terminal in the cab.
Get your yield increased with more sections
To maximise your output and business there is the possibility to get Basic Section Control software on the Exacta-CL EW, Exacta CL W PRO and the Exacta-TL weighing spreader. A simple way to reduce the overdosing on the headland or irregular shaped of fields by increasing the number of sections. On a standard Kverneland disc spreader the working width can be divided into 1 left and 1 right hand side section – to only shut off half of the working width. The principle of Basic Section Control is based on an even number of 4 metre sections. For example when spreading on 24 metres with 6 sections for the Exacta CL EW/CL W PRO or spreading on 36 metres with 8 sections for the TL.
All standard weighing spreaders (without GEOSPREAD) are equipped with one electrical actuator on each spreading disc to control the application rate to provide maximum use of nutrients to the grass or crops. The Basic Section Control software adjusts the dosing system by a GPS positioning system to optimise overlap and coverage with a minimum over and under dosing. This results in a better yield and a reduction of costs. The SPREADERcontrol license is needed to do Basic Section Control.
With the AutosetApp you have always the most up to date settings for your weighing spreader available. There are two ways to make use of the AutosetApp.
Exacta-CL/TL/TLX GEOSPREAD in combination with Kverneland Sync
Via the AutosetApp functionality within the Kverneland SpreadApp you can set-up your GEOSPREAD spreader in combination with a Kverneland Sync, via your mobile device.
Through the Bluetooth connection, operators can seamlessly connect the GEOSPREAD spreader to a mobile device, such as smartphone or tablet, using the AutosetApp functionality. This allows for the efficient transfer of spreader settings and presets directly from the mobile device to the spreader.
The benefits of this connectivity include error-free storage and transfer of spreading jobs. Additionally, the integrated filling calculator provides an exact measurement of the fertiliser needed to complete the spreading job, while real-time weight updates in the hopper are displayed directly on the App during filling, improving efficiency and accuracy.
Exacta-CL EW/CL W PRO/TL and all GEOSPREAD models without Kverneland Sync
The AutosetApp is an App (software application) that is also available on the IsoMatch Tellus PRO or IsoMatch Tellus GO+ terminal. The AutosetApp is standard integrated into the IsoMatch GEOCONTROL software. This App connects the terminal directly with the GEOSPREAD weighing spreader and will automatically adjust the spreader according to the settings entered into the App. The AutosetApp will also work in combination with the CL-EW, W PRO and TL, with the exception being for those spreaders the discharge point (letter setting) still needs to be adjusted manually on the spreader itself.
Caractéristiques techniques
Caractéristiques techniques
Télécharger la documentationExacta CL W PRO | |||||
---|---|---|---|---|---|
Capacité de la trémie (l) | 1300 | 1800 | 2300 | 2800 | |
Hauteur de remplissage (cm) | 113 | 132 | 151 | 170 | |
Largeur (cm) | 245 | 245 | 245 | 245 | |
Largeur de remplissage (cm) | 239 | 239 | 239 | 239 | |
Poids à vide (kg) | 480 | 505 | 530 | 555 | |
Largeur d'épandage (m) | 10-24 (27-33)* | 10-24 (27-33)* | 10-24 (27-33)* | 10-24 (27-33)* | |
Débit (kg/min) | 10-320 | 10-320 | 10-320 | 10-320 | |
Contrôles | ISOBUS | ISOBUS | ISOBUS | ISOBUS | |
Kit d'éclairage LED | Option | Option | Option | Option | |
Déflecteur de bordure central | Option | Option | Option | Option | |
Déflecteur de bordure latéral | Option | Option | Option | Option |
*En fonction du type d'engrais et des pales
Caractéristiques techniques
Caractéristiques techniques
Télécharger la documentationExacta CL W PRO |
Exacta CL W PRO 1300 |
Exacta CL W PRO 1800 |
Exacta CL W PRO 2300 |
Exacta CL W PRO 2800 |
Hopper capacity (l) |
1300 |
1800 |
2300 |
2800 |
Filling height (cm) |
113 |
132 |
151 |
170 |
Width (cm) |
245 |
|||
Filling width (cm) |
239 |
|||
Empty weight (kg) |
495 |
520 |
545 |
570 |
Spread width (m) |
10 - 24 (27/33)* |
|||
Output (kg/min) |
10 - 320 |
* Depending on fertiliser type and type of vanes.
*En fonction du type d'engrais et des pales